This mock exam is timed. You will be given 60 minutes to answer 30 multiple choice questions and answers. At the end you will be given your score. When you are ready to start, click the button below.
How do you arrange a demonstration test once you have completed the required training?
You have refused to test a vehicle and the presenter requires confirmation in writing. What should you do?
A customer has returned to your VTS with the vehicle that has been tested. They point out that the vehicle now has a personalised VRM so the VRM as recorded on the current VT20 is wrong. What is the correct course of action?
You are testing a vehicle and suddenly begin to feel very unwell to an extent that you cannot continue. Can you abandon the test?
Contingency test procedure - When can it be used?
What is the time limit on a PRS and what must you not do in that hour or until the results of the PRS are entered onto the MOT Testing service? Tip: Section B5.9
A vehicle is presented for verification that faults have been rectified under the Vehicle Defect Rectification Scheme. You must register the vehicle on the MTS and issue an endorsement and VT20 or a VT30 should it fail your checks. Tip: Section K
You are testing a 2006 Honda Accord with a petrol engine, do you need to check that the engine malfunction indicator lamp (MIL) illuminates and then goes off?
The vehicle you are testing has produced a lambda reading outside the manufacturers specified range. What is do you do?
Which of these is a valid example supplied by DVSA that could justify why your TQI is different when you interpret the TQI information?
The speed rating for the tyres you are checking on a class 7 vehicle do not exist. What should you do?
From what date do you need to inspect the function of the MIL light on diesel vehicles?
Select the following defects for trailer electrical sockets that are in the major category.
Please select 3 correct answers
The vehicle you are testing has been fitted with a tow bar for towing a caravan. However the ball has been unbolted and removed leaving the brackets in place and otherwise functional. What do you do?
What is the defining upper weight limit (DGW) for M1 vehicles?
Could you be awarded a cessation for a single incidence of substandard testing?
What is the maximum number of days of test logs that you can view on the MTS?
True or false. It is mandatory to make available to customers the form VT17 on request of the customer. This form should be use by the customer if they wish to appeal the issue of a test certificate or the refusal to issue a test certificate.
If drivers beam controls are fitted you cannot use them to adjust the lamps before test. Select the correct statement.
The approved device for testing 13-pin Euro-sockets will enable you to assess the trailer position lamps, stop lamps, indicator lamps and the rear fog lamp but if the electrical socket is hidden behind a cover that needs tools to remove what do you do?
The passenger vehicle you are testing has 6 passenger seats in addition to the drivers seat. It also has a space designed to accommodate 4 occupied wheelchairs. What is the correct classification of this vehicle given the DGW is 4,000kg?
The VIN number on the vehicle you are performing test pre-checks is unreadable. What should you do?
If you receive a Contemplated Disciplinary letter how long do you have to make written representations about the case?
What is an inverted appeal?
During the retest you are conducting it is clear that the vehicle will fail due to an inadequate repair that would take you 5 minutes to fix. What should you do?
If you test at more than one test location how do you access your TQI data for each site?
You are testing a Toyota Yaris that has arrived at your MOT station towing a caravan. The owners have already set up their caravan in the car park and are having a cup of tea. During the test you have to inspect the tow bar which has had a tow ball cover put back on since arriving. Do you need to remove the tow ball cover to carry out the test ?
When a test cannot be completed because of a problem with the test equipment or the tester. What do you do?
A duplicate test certificate can be issued by any VTS role and by any VTS, as long as the duplicate is not issued more than 18 months after the date of test and the client can demonstrate their right to acquire the duplicate documentation. Can you charge the customer for a duplicate test certificate?
The brake fluid is at the correct level on the vehicle you are testing but you can see through the sight glass that it may be contaminated. What should you do?
Share your Results: